The trouble with solid wood is it shrinks or swells across the grain with changes in humidity in the environment. It can move a lot. The rule of thumb in woodworking is not to glue wood cross grain over 8 inches wide. But we routinely do it in the hammered dulcimer world, gluing tops as wide as 24 inches to maple pin blocks. It is asking for trouble, but we all do it. If the top is not totally dry when glued to the frame, and it shrinks in winter, it can crack. If it is dry, but the humidity goes way up, it will swell and put stress on the overall instrument.
The construction of the top for the Finch model is a completely new and novel way to eliminate this problem. They are composed of 7 individual narrow boards joined by tight fitting tongue and groove joints which are not glued. This allows each individual board to shrink or swell as it needs without causing problems. No more cracks, no warps, no having to keep your dulcimer in a specially humidified environment in the winter or you void your warrantee, no worries at all. Just play it and enjoy it. We believe this is the way solid wood top hammered dulcimers should be built. It works great! We have tested them, and they will take almost any environment and just sound good. No special care necessary. Sound holes all need to be in the back on these. Cutting sound holes on the top would compromise the structure.
Our standard model will be the Walnut. It has Curly Maple bindings, Hard Maple sides, Cherry bridges, and laminated Birch back.
This dulcimer can be purchased dulcimer only (includes hammers and tuning wrench) or as a package (case, stand, hammers, tuning wrench, tuner, book).
Songbird Finch Chromatic
Hammered Dulcimer Stand
Snark Chromatic Tuner
Hammered Dulcimer Instruction Book